3000T - Trace Oxygen Analyzers在線氧氣分析儀

Industrial Products

簡單介紹:
1,Model 3000TA-XL 盤裝式微量氧分析儀簡單,快速和**的測量,簡單的菜單式選擇,觸摸鍵開關和大LED顯示器操作,適應于空氣分離和液化,純碳氫化合物氣流監測,半導體制造業,可燃液體和原液給料的保護監測,乙烯,丙烯,丁二烯,橡膠基以及VCM的生產過程監測,氣體純度的鑒定,量程:0-10PPM
2,Model 3000TB 墻壁安裝式量氧分析儀,量程:0-10PPM
3,Model 3010TA按分體式設計,用于非危險區域的通用控制單元控制和用于危險區域的分析單元
4,Model 3010TB按分體式設計,用于非危險區域的通用控制單元控制和用于危險區域的分析單元
5, 3020T 防爆,墻壁安裝

Model 3000TA - general purpose unit

Series 3000T - Trace Oxygen Analyzers

The Series 3000T Trace Oxygen Analyzers provides powerful microprocessor technology while offering tremendous versatility in the low ppm ranges. This instrument offers three user-selectable linear ranges, high accuracy, fast response, adjustable alarms, and auto diagnostics.

No zero gases are required in most applications. The heart of the analyzer is a specially qualified Micro-fuel Cell designed to measure oxygen in the gas sample.

The sensor is unequaled in the industry for its accuracy, sensitivity, and reliability. The instruments can be used as a separate unit or as a component of a larger analytical system.

Applications include: Air separation, Petrochemical, Chemical processes, Furnace

Model 3000TB - wall mount unit

The Model 3000TA-XL High Sensitivity Trace Oxygen Analyzer is a cost-effective instrument for measuring oxygen in the 0-1 ppm region. This analyzer offers three dynamic, user-configurable ranges and can be calibrated in any range.

The instrument comes standard with two sets of analog outputs for oxygen concentration and range identification. A bi-directional RS-232C serial communication interface provides for remote monitoring and control of span and zero functions.

The heart of the 3000TA-XL is Teledyne's own B-2CXL sensor which is specific to oxygen and can be used in a variety of background gases including hydrocarbons.





The Model 3000TB Oxygen Analyzer is the bulkhead mount version in the 3000 series of full service oxygen analyzers. This unit provides the latest in powerful microprocessor technology while offering tremendous versatility.

Designed with the user in mind, this unit offers three user-selectable linear ranges, high accuracy, fast response, two adjustable alarms, and auto diagnostics. No zero gases are required.

3000 Trace Series Overview
3000TA-XL	Panel mount	0-1 ppm O2
3000ZA-XL	Panel mount	0-5 ppm O2, ZrO2 type
3000TA	Panel mount	0-10 ppm O2 and above
3000TB	Wall mount	0-10 ppm O2 and above
3010TA	Split architecture - panel mount control unit	0-10 ppm O2 and above
3010TB	Split architecture - wall mount control unit	0-10 ppm O2 and above
3010TAC	Split architecture - I/S Cenelec, panel mount control unit	0-10 ppm O2 and above
3010TBC	Split architecture - I/S Cenelec, wall mount control unit	0-10 ppm O2 and above
3020T	Fully explosion proof unit unit	0-10 ppm O2 and above

Data sheets for the complete line of instruments are available as PDF documents for download

• 3000TA-XL
• 3000TA
• 3000TB
• 3010TA
• 3010TB
• 3020T

3000 Series - Application Notes on Restrictors, Pressures, and Flow Recommendations

Model 3010TA - Split architecture version with general purpose control unit	Model 3010TB - Split architecture version with wall mount control unit

The Model 3010TA Trace Oxygen Analyzer is designed as a split architecture version of the 3000 series. A general purpose control unit, designed for non-hazardous areas, controls a specially developed analysis unit that can operate in a hazardous area.

The explosion proof enclosure is NEMA 4/7 rated, U/L and CSA listed for Class I, Division 1, Groups B, C, and D service. Options include cal/zero valves and flame arrestors

Model 3020T - totally explosion proof configuration

The Model 3010TB Trace Oxygen Analyzer is designed as a split architecture version of the 3000 series. A bulkhead mount, NEMA 4 rated control unit designed for non-hazardous areas, controls a specially developed analysis unit that can operate in a hazardous area.

The explosion proof enclosure is NEMA 4/7 rated, U/L and CSA listed for Class I, Division 1, Groups B, C, and D service. Options include cal / zero valves and flame arrestors.

The 3020T Trace Oxygen Analyzer serves as the completely explosion proof version of the 3000 series. This unit provides superior oxygen analysis in an explosion proof enclosure rated at NEMA 4/7, U/L and CSA listed for Class I, Division 1, Groups B, C, & D service.

Three user-programmable ranges and auto ranging come standard with an excellent linearity precluding the need to recalibrate when changing ranges. Fully programmable alarms provide versatility, and an array of Teledyne's advanced Micro-fuel Cell sensors can be utilized depending on the customer's needs - such as fast response or long life.

Relevant Application Bulletins

- Trace Oxygen measurement in Pure Gas Manufacturing
- Trace Oxygen measurement in Carbon Dioxide in breweries and distilleries
- Monitoring oxygen in Landfill Methane Recovery